Wilwood 12.19″ Red Dynapro 6-Piston Front Disc Brake Kit for 1965-1966 Mustangs with V8 Spindles and all 1967, 1968 and 1969 Mustangs.
Take your Mustangs brake from barely stopping, to being able to stop on a dime. This Dynapro Front Disc Brake kit from Wilwood converts your factory front drum or disc brakes to a performance 2-Piece 12.19″ rotors with 6-Piston calipers. This Dynapro 6-Piston Front Disc Brake Kit will allow you to install some 15″ wheels.
– Pair of Forged Dynapro Black or Red Powder Coated Calipers
– Pair of Caliper Mounting Brackets
– Pair of 12.19″ 2-Piece Drilled & Slotted Rotors
– Big Aluminum Brake Rotor Hats
– Set of Brake Pads
– All Necessary Mounting Hardware
– Direct Bolt-on Upgrade
– Increased Brake Capacity
– Compliments Wheels
– Ideal for Street and Track Use
– Enhances Tire and Suspension Upgrades
– Built Exclusively for 15″ or Larger Wheels
– Can Be Used with a Stock or Boost Master Cylinder
Please Note: This Hub Offset (+.09” (2.286mm) will move the wheels inward or outward from the fender by this amount on each side of the vehicle.
Wilwood includes a pair of Drilled and Slotted 2-Piece Rotors that are 12.19″ in diameter and feature a particularly engineered directional drilled and slotted vented rotor pattern. This pattern improves the response of the brakes and brake pad performance throughout the full range of light-to-heavy braking. The venting and cleaning of the holes and slots will shrink pad glaze along with releasing gasses and heat that is generated during heavy or light braking. The holes and slots of the rotors also prevent irregular pad compound build-up that allows a smoother braking engagement and upgraded pedal response in any driving situation. Each rotor is finished with a black e-coat finish that protects rust from occurring.
*Kits requires the purchase of additional brake lines.
The 2-piece 12.19″ rotors are incorporated with hats that are specially made from premium aluminum alloys for quality strength and attention to minimized weight. These hats have threaded rotor mount holes and produce consistently reliable outcomes even in the most difficult circumstances. The hats also come with a black e-coat finish to help fight against rust and corrosion build up.